The problem with eps07 is resolved. the designed tile is functional and responds to touch. I am still waiting for the CJMCU2317 relay control system and I am assembling the equipment.
Could @elmaya colleague support DS18 on GPIO2? I will come and thank you for the nice project
.
Esp8266 12 touch control relay
-
- Posts: 2279
- Joined: Sun Sep 03, 2017 9:13 am
- Location: Koszalin
You do not have the required permissions to view the files attached to this post.
jak coś nie działa to włącz zasilanie.....
-
- Posts: 2279
- Joined: Sun Sep 03, 2017 9:13 am
- Location: Koszalin
Almost complex. Of course it works - a movie from the test. I am still waiting for the 23017 chip and it folded together with the buttons. I will definitely present
https://www.youtube.com/watch?v=HhSvnoFE0nc
https://www.youtube.com/watch?v=HhSvnoFE0nc
jak coś nie działa to włącz zasilanie.....
-
- Posts: 81
- Joined: Sun Sep 09, 2018 5:32 pm
PCB is ordered, waiting for delivery. For those touch buttons, do you need to order anything apart from MPR module? Is there anything soldered on the other side of BUTTONs PCB?
-
- Posts: 1482
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
you just solder the wire to these fantastic touch buttons
-
- Posts: 81
- Joined: Sun Sep 09, 2018 5:32 pm
Finally my tile is ready for config, hopefully will have time to do it over the weekend. Can you let me know which MCP module have you used, mine didn't fit very well and I had to bent pins to make it work.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2
- Joined: Sun Sep 06, 2020 7:17 pm
Hello, this is my first post here. I have a problem to compile code from the first post.
My logs:
My logs:
supla:590:1: error: 'SuplaDeviceCallbacks' does not name a type
C:\Users\Paweł\Desktop\supla\supla.ino: In function 'void setup()':
supla:444:15: error: 'class SuplaDeviceClass' has no member named 'setDigitalReadFuncImpl'
supla:445:15: error: 'class SuplaDeviceClass' has no member named 'setDigitalWriteFuncImpl'
supla:455:34: error: invalid conversion from 'uint8_t* {aka unsigned char*}' to 'const char*' [-fpermissive]
In file included from C:\Users\Paweł\Desktop\supla\supla.ino:4:0:
C:\Users\Pawe�\Documents\Arduino\libraries\SuplaDevice\src/SuplaDevice.h:207:8: error: initializing argument 2 of 'bool SuplaDeviceClass::begin(char*, const char*, const char*, char*, unsigned char)' [-fpermissive]
bool begin(char GUID[SUPLA_GUID_SIZE],
^
supla:455:34: error: invalid conversion from 'int' to 'char*' [-fpermissive]
In file included from C:\Users\Paweł\Desktop\supla\supla.ino:4:0:
C:\Users\Pawe�\Documents\Arduino\libraries\SuplaDevice\src/SuplaDevice.h:207:8: error: initializing argument 4 of 'bool SuplaDeviceClass::begin(char*, const char*, const char*, char*, unsigned char)' [-fpermissive]
bool begin(char GUID[SUPLA_GUID_SIZE],
^
supla:455:34: error: invalid conversion from 'char*' to 'unsigned char' [-fpermissive]
In file included from C:\Users\Paweł\Desktop\supla\supla.ino:4:0:
C:\Users\Pawe�\Documents\Arduino\libraries\SuplaDevice\src/SuplaDevice.h:207:8: error: initializing argument 5 of 'bool SuplaDeviceClass::begin(char*, const char*, const char*, char*, unsigned char)' [-fpermissive]
bool begin(char GUID[SUPLA_GUID_SIZE],
^
C:\Users\Paweł\Desktop\supla\supla.ino: At global scope:
supla:590:1: error: 'SuplaDeviceCallbacks' does not name a type
exit status 1
'SuplaDeviceCallbacks' does not name a type
-
- Posts: 1482
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
It seems that you do not have the correct Supla library
https://github.com/SUPLA/arduino
and please read the first line of the code carefully.
https://github.com/SUPLA/arduino
and please read the first line of the code carefully.
-
- Posts: 81
- Joined: Sun Sep 09, 2018 5:32 pm
Hi Guys,
I would like to use this board to manage floor heating, 9 circuits. However I need one more functionality I need additional circuit that will close whenever one of 9 circuits is closed to steer the pump. Is it possible, are there any relay module that has like additional circuit which close whenever one main circuits is closed?
I would like to use this board to manage floor heating, 9 circuits. However I need one more functionality I need additional circuit that will close whenever one of 9 circuits is closed to steer the pump. Is it possible, are there any relay module that has like additional circuit which close whenever one main circuits is closed?